Other Related Topics...
Setting the FaxPress Plus Server Properties
The FaxPress Plus Server Properties, a collection of the FaxPress Plus server’s configurable fax parameters, are accessed through FaxPress Plus, the client-based administration and fax transmission utility. FaxPress Plus is available on client workstations after the FaxPress Plus client software is installed.
If you have not yet configured the FaxPress Premier for basic operation, see Configuring the FaxPress Premier .
The FaxPress Premier Server Properties include these settings:
Routing Type (Digital Premier)
User Authentication (Novell only)
*Configuration required.
Two of the FaxPress Premier’s Server Properties, the Line Settings and the Dialing Properties, require configuration immediately, before the FaxPress Premier can send and receive faxes. The Email properties should also be configured. These settings enable the Premier to send system alert notices to the administrator and send faxes to email as well as fax recipients. They also allow users to access their email address books for fax addressing, and for fax/email integration using the Email Gateway. The DID/PBX settings must also be configured for integration with your PBX system and DID trunk.
To configure DID/PBX integration, see Automatic Routing and PBX Integration.
The rest of the Server Properties can be configured as needed after the FaxPress Premier is operational.
Accessing the FaxPress Premier Server Properties
For more information on configuring the Premier, see Configuring the FaxPress Premier .
To access the FaxPress Premier server properties, follow these steps:
| 1. | Open FaxPress Plus (Start>Programs>FaxPress Plus>FaxPress Plus). If you need more detailed information on logging into FaxPress Plus, see FaxPress Plus Introduction. |
| 2. | Select the All Folders view, expand the FaxPress Neighborhood, right-click on the serial number or name of the FaxPress Premier, and select Login as. |
| 3. | Enter Administrator in the User Name field, and leave the Password field blank, unless you’ve already set an Administrator password. By default, the Administrator password field is blank. |
| 4. | Right-click again on the FaxPress Premier name or serial number, and select Properties to open the FaxPress Premier Server Properties. |
If you log in without Administrator privileges, the Server Properties will be grayed out. You must be logged in with Administrator privileges to configure the Premier.
|
FaxPress Premier WebHelp
Last Updated: 11/1/2007
E-mail this page |
Castelle 855 Jarvis Drive, Suite 100 Morgan Hill, CA 95037 Toll-free 800.289.7555 Tel 408.852.8000 Fax 408.852.8100 |